MaxiEpoxy 770 (20L) - Extra light, high thickness epoxy coating
Super-lightweight two-component epoxy coating for high thicknesses
Enables high thicknesses to be obtained for each layer of product applied
Excellent spreadability, flexible, solvent-free, no shrinkage, no sagging during curing, strong adhesion
Can be used on any type of substrate (steel, aluminium, composite materials or wood)
Super-lightweight two-component epoxy coating for large thicknesses, solvent-free, mixable by hand or with appropriate machines, with excellent spreadability and high final flexibility after curing.
It allows high thicknesses to be achieved for each layer of product applied, without problems of shrinkage or sagging during curing.
Can be used on any type of substrate (steel, aluminium, composite materials or wood) previously treated with suitable epoxy primers.
It levels out defective surfaces without weighing the boat down, even when used in large quantities.
It has excellent sandability, strong adhesion, high mechanical resistance values when cured and is suitable above and below the waterline if used in accordance with the technical instructions supplied.
Colour: Light blue
Ratio: 1:1
Theoretical coverage: 0.1m²/L at 1 cm thickness
Application temperature: 10 to 35°C
Time at 21°C: Pot life 45 minutes, Sandable 16-24h, fully cured 7d
Data sheet
- Conditioning
- 20L
- Consumption
- 0,1m²/L
- Mix ratio
- 1:1
- Color
- Light blue
- Polymerization time
- 16-24h
- Total polymerization time
- 7 days