English GB
Français 
Español 
Português PT 
Vacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
Filter By
Filter By
Vacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
PTFE Silicone Adhesive Tape 25mm 33m, 260°c
PTFE Silicone Adhesive Tape 25mm 33m, 260°c
€118.80
(VAT incl.)
On order. Delay of about 3 to 4 weeks.
Non-reinforced high-temperature silicone PTFE adhesive tape, 25mm wide, 33m long, 260°C
High temperature vacuum socket BSP, 210°C
High temperature vacuum socket BSP, 210°C
€8.77
(VAT incl.)
In stock
Vacuum connection in BSP, 210°CEquipment for high temperature
Teflon adhesive silicone sheet used for demolding. Width: 1000mm. Max use: up to 320°c
Teflon adhesive silicone sheet used for demolding. Width: 1000mm. Max use: up to 320°c
€78.00
(VAT incl.)
In stock
Teflon coated glass fabric used for demolding. Non-developable.Adheres to metal and wooden moldsStable during curing and autoclaveRecommended for use on flat or single curved surfacesCan be assembled with a butt...
High temperature vacuum plug BSP, 210°C
High temperature vacuum plug BSP, 210°C
€18.47
(VAT incl.)
In stock
High temperature vacuum plug in BSP
PET breathable fabric. To evacuate air from a laminate before and during curing. Max: 210°C. 150G/m². Width: 152cm
PET breathable fabric. To evacuate air from a laminate before and during curing. Max: 210°C. 150G/m². Width: 152cm
€6.38
(VAT incl.)
In stock
Breathable fabric used to evacuate air from a laminate before and during curing.Maximum use: up to 210°c150G/m² weightWidth: 152cmSold by 5 meters minimum
Pink vacuum bagging film for infusion. Maximum use up to 204°C. Width: 150cm, thickness: 50microns
Pink vacuum bagging film for infusion. Maximum use up to 204°C. Width: 150cm, thickness: 50microns
€3.58
(VAT incl.)
In stock
Pink vacuum bagging film made of modified single-layer nylon for better stability at high temperatures.
For high pressure oven and autoclave curing.
It is generally used for autoclave treatment of epoxy and BMI...
Epoxy glue brushes. For gluing and coating applications. WEST SYSTEM. x100
Epoxy glue brushes. For gluing and coating applications. WEST SYSTEM. x100
€111.72
(VAT incl.)
In stock
Glue brushes, wooden handle, practical and disposable
Packaging: 100 brushes
Associated products:
- Reusable graduated mixing pot. Ref: WS805
- Flexible coating squeegees. Ref: WS808-12
- Reusable notched spatula....
Green vacuum bagging film for infusion. Maximum use up to 200°C. Width: 200cm, thickness: 50microns
Green vacuum bagging film for infusion. Maximum use up to 200°C. Width: 200cm, thickness: 50microns
€4.48
(VAT incl.)
In stock
Vacuum bagging film for medium and high temperature oven and autoclave processing.
Strong but flexible nylon monolayer film.
Developed for use prior to curing.
Suitable for all pretreatments
Roll : 1.5mx200ml
Sold by...
Green vacuum bagging film for infusion. Maximum use up to 200°C. Width: 150cm, thickness: 50microns
Green vacuum bagging film for infusion. Maximum use up to 200°C. Width: 150cm, thickness: 50microns
€2.18
(VAT incl.)
On order. Delay of about 3 to 4 weeks.
Vacuum bagging film for medium and high temperature oven and autoclave processing.
Strong but flexible nylon monolayer film.
Developed for use prior to curing.
Suitable for all pretreatments
Roll : 1.5mx150ml
Sold by...
Orange vacuum bagging film for infusion. Maximum use up to 170°C. Width: 230cm, thickness: 75microns
Orange vacuum bagging film for infusion. Maximum use up to 170°C. Width: 230cm, thickness: 75microns
€6.28
(VAT incl.)
On order. Delay of about 3 to 4 weeks.
Highly flexible multilayer nylon vacuum bagging films
Designed for the processing of advanced composite structures and laminated safety glass.
This film is ideal for use in ovens and autoclaves up to a maximum...
Red vacuum bagging film for infusion. Maximum use up to 170°C. Width: 30cm, thickness: 70microns
Red vacuum bagging film for infusion. Maximum use up to 170°C. Width: 30cm, thickness: 70microns
€1.74
(VAT incl.)
In stock
Red multi-layer vacuum bagging film (5 layers)
Designed for the treatment of hollow composite structures.
For oven and autoclave curing
Ideal for internal molding applications
Compatible with epoxy and phenolic...
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 1200cm, thickness: 75microns
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 1200cm, thickness: 75microns
€24.74
(VAT incl.)
On order. Delay of about 3 to 4 weeks.
Ideal for resin infusion and prepreg molding applications.
Suitable for all commonly used resin systems.
Not suitable for autoclave use for composite processing.
10mx75ml
Sold by 5 ml minimum
Blue perforated separator film (P3). Used between the tear-off fabric and the net. Limits the rise of resin. 15µ. 230°C
Blue perforated separator film (P3). Used between the tear-off fabric and the net. Limits the rise of resin. 15µ. 230°C
€6.65
(VAT incl.)
On order. Delay of about 3 to 4 weeks.
Separation (or release) film that is used between the tear away fabric and the net to limit the rise of resin.
Allows for easier mold release.
Designed for high temperature curing of advanced composite materials...
Unperforated blue separator film 15µ 230°c, in 130 cm width, sold per 5ml
Unperforated blue separator film 15µ 230°c, in 130 cm width, sold per 5ml
€11.00
(VAT incl.)
On order. Delay of about 3 to 4 weeks.
Unperforated separator film Blue15µ 230°c130 cm wide,sold by 5ml
Perforated yellow separator film 30µ (P31) 153°c, in 150 cm width, sold per 5ml
Perforated yellow separator film 30µ (P31) 153°c, in 150 cm width, sold per 5ml
€1.57
(VAT incl.)
On order. Delay of about 3 to 4 weeks.
Perforated yellow separator film30µ (P31) 153°c150 cm widesold by 5ml