Lightweight Sandwich Panel Solution
The DuFlex lightweight composite panel solution is a composite panel system that minimizes weight and maximizes mechanical properties. The panels are made of rigid balsa end grain wood or structural and non-structural foam, and laminated with a high performance epoxy resin reinforced with a multiaxial fiberglass or carbon fiber film.
Subcategories
-
DuFLEX® : lightweight composite panel
<h1 style="text-align:center;"><img src="https://directeck.fr/img/cms/category_100.png" alt="" style="margin-left:auto;margin-right:auto;" width="880" height="200" /></h1> <h1 style="text-align:justify;"><span style="color:#2b7e27;">Lightweight composite panel solution</span></h1> <h6>The DuFlex lightweight sandwich panel solution is a composite panel system that minimizes weight and maximizes mechanical properties. The panels are made of rigid balsa wood butt or structural and non-structural foam, and laminated with a high performance epoxy resin reinforced with a multi-axial film of glass or carbon fibre.</h6> <h2><span style="color:#2b7e27;">Technical characteristics of the panels</span></h2> <h6>By using epoxy resin instead of polyester resin, a reduction in laminate thickness is achieved while improving moisture and wear tolerance. Epoxy resin has better resistance to moisture and wear.</h6> <h3><span style="color:#2b7e27;">Joining the panels</span></h3> <h6>DuFlex panels can be supplied with both long edges pre-machined for easy assembly. The Z-joint is structurally efficient and results in a smooth and even surface profile. The Z-joint should be bonded with a high density epoxy mixture.<br /><br /><br /></h6> -
PRO-VAC: Comsumable for vacuum infusions
<h1 style="text-align:center;"><img src="https://directeck.fr/img/cms/pro-vac.jpg" alt="" width="1050" height="331" /></h1> <h1></h1> <h1><span style="color:#2b7e27;">Vacuum infusion molding</span></h1> <h6><br />Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.</h6> <h3><span style="color:#2b7e27;">The advantages</span></h3> <h6>Improve the resistance of the composite<br />Saves weight<br />Use of just the right amount of resin (better strength to weight ratio)<br />Production of large and small parts in one-shot</h6> -
PRO-SET: Resin for infusion
<h4 style="text-align:center;"><span style="color:#2b7e27;">PRO-SET: Standard infusion systems</span></h4> <p style="margin:0in;font-family:'Calibri Light';font-size:12pt;"><span style="text-decoration:underline;">PRO-SET epoxy infusion resins are very low viscosity systems</span> with a wide range of hardeners (super slow, slow, medium and fast) to meet the requirements of modern infusion processes.</p> <p></p> <p style="margin:0in;font-family:'Calibri Light';font-size:12pt;"><strong>Infusion epoxy resins provide lightweight, high-performance composites that will withstand long-term cyclic loading in the harshest environments</strong>.</p> <p></p> <p style="margin:0in;font-family:'Calibri Light';font-size:12pt;"><span style="text-decoration:underline;">They develop excellent physical properties at room temperature and can be post-cured to further enhance performance.</span></p> <p></p> <p style="margin:0in;font-family:'Calibri Light';font-size:12pt;">Infusion epoxy resins can be dyed, upon request, to allow visual quality control.</p> <p></p> <p style="margin:0in;font-family:'Calibri Light';font-size:12pt;">A yellow dye in the resin and a blue dye in the hardener, when properly proportioned and carefully mixed, will result in a consistent shade of green.</p> <p><br /><br /></p>
Lightweight Sandwich Panel Solution
The DuFlex lightweight composite panel solution is a composite panel system that minimizes weight and maximizes mechanical properties. The panels are made of rigid balsa end grain wood or structural and non-structural foam, and laminated with a high performance epoxy resin reinforced with a multiaxial fiberglass or carbon fiber film.
Subcategories
-
DuFLEX® : lightweight composite panel
<h1 style="text-align:center;"><img src="https://directeck.fr/img/cms/category_100.png" alt="" style="margin-left:auto;margin-right:auto;" width="880" height="200" /></h1> <h1 style="text-align:justify;"><span style="color:#2b7e27;">Lightweight composite panel solution</span></h1> <h6>The DuFlex lightweight sandwich panel solution is a composite panel system that minimizes weight and maximizes mechanical properties. The panels are made of rigid balsa wood butt or structural and non-structural foam, and laminated with a high performance epoxy resin reinforced with a multi-axial film of glass or carbon fibre.</h6> <h2><span style="color:#2b7e27;">Technical characteristics of the panels</span></h2> <h6>By using epoxy resin instead of polyester resin, a reduction in laminate thickness is achieved while improving moisture and wear tolerance. Epoxy resin has better resistance to moisture and wear.</h6> <h3><span style="color:#2b7e27;">Joining the panels</span></h3> <h6>DuFlex panels can be supplied with both long edges pre-machined for easy assembly. The Z-joint is structurally efficient and results in a smooth and even surface profile. The Z-joint should be bonded with a high density epoxy mixture.<br /><br /><br /></h6> -
PRO-VAC: Comsumable for vacuum infusions
<h1 style="text-align:center;"><img src="https://directeck.fr/img/cms/pro-vac.jpg" alt="" width="1050" height="331" /></h1> <h1></h1> <h1><span style="color:#2b7e27;">Vacuum infusion molding</span></h1> <h6><br />Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.</h6> <h3><span style="color:#2b7e27;">The advantages</span></h3> <h6>Improve the resistance of the composite<br />Saves weight<br />Use of just the right amount of resin (better strength to weight ratio)<br />Production of large and small parts in one-shot</h6> -
PRO-SET: Resin for infusion
<h4 style="text-align:center;"><span style="color:#2b7e27;">PRO-SET: Standard infusion systems</span></h4> <p style="margin:0in;font-family:'Calibri Light';font-size:12pt;"><span style="text-decoration:underline;">PRO-SET epoxy infusion resins are very low viscosity systems</span> with a wide range of hardeners (super slow, slow, medium and fast) to meet the requirements of modern infusion processes.</p> <p></p> <p style="margin:0in;font-family:'Calibri Light';font-size:12pt;"><strong>Infusion epoxy resins provide lightweight, high-performance composites that will withstand long-term cyclic loading in the harshest environments</strong>.</p> <p></p> <p style="margin:0in;font-family:'Calibri Light';font-size:12pt;"><span style="text-decoration:underline;">They develop excellent physical properties at room temperature and can be post-cured to further enhance performance.</span></p> <p></p> <p style="margin:0in;font-family:'Calibri Light';font-size:12pt;">Infusion epoxy resins can be dyed, upon request, to allow visual quality control.</p> <p></p> <p style="margin:0in;font-family:'Calibri Light';font-size:12pt;">A yellow dye in the resin and a blue dye in the hardener, when properly proportioned and carefully mixed, will result in a consistent shade of green.</p> <p><br /><br /></p>
Epoxy resin infusion for INF-114 Pro-set 5Kg
Epoxy resin infusion for INF-114 Pro-set 5Kg
€108.91
(VAT incl.)
In stock
INF-114 infusion resin (ambient or high cure)Epoxy infusion resin Pro-set 5Kg
PTFE Silicone Adhesive Tape 25mm 33m, 260°c
PTFE Silicone Adhesive Tape 25mm 33m, 260°c
€118.80
(VAT incl.)
On order. Delay of about 3 to 4 weeks.
Non-reinforced high-temperature silicone PTFE adhesive tape, 25mm wide, 33m long, 260°C
DUFLEX Divinycell 26.3mm, panels 2400x1200mm, 2.88m², 4.7 kg/m² (+Divinycell foam)
DUFLEX Divinycell 26.3mm, panels 2400x1200mm, 2.88m², 4.7 kg/m² (+Divinycell foam)
€986.83
(VAT incl.)
On order : 4 weeks delay
DUFLEX Divinycell 26.3mmpanels 2400x1200mm 2.88m² 4.7 kg/m² panels(+Divinycell foam 10mm + on both sides biaxial fiber 600g + epoxy + tear-off fabric)
High temperature vacuum socket BSP, 210°C
High temperature vacuum socket BSP, 210°C
€8.77
(VAT incl.)
In stock
Vacuum connection in BSP, 210°CEquipment for high temperature
Fast hardener 210 for epoxy infusion 114 Pro-set 1.37kg
Fast hardener 210 for epoxy infusion 114 Pro-set 1.37kg
€74.05
(VAT incl.)
In stock
INF-210 Fast Infusion HardenerFast Infusion Hardener 210 for Epoxy Infusion 114
Teflon adhesive silicone sheet used for demolding. Width: 1000mm. Max use: up to 320°c
Teflon adhesive silicone sheet used for demolding. Width: 1000mm. Max use: up to 320°c
€78.00
(VAT incl.)
In stock
Teflon coated glass fabric used for demolding. Non-developable.Adheres to metal and wooden moldsStable during curing and autoclaveRecommended for use on flat or single curved surfacesCan be assembled with a butt...
DuFLEX® Balsa 31.3mm, panels 2400x1200mm 2.88m² 6.9 kg/m².
DuFLEX® Balsa 31.3mm, panels 2400x1200mm 2.88m² 6.9 kg/m².
€1,137.83
(VAT incl.)
On order : 4 weeks delay
DuFLEX® Balsa 31.3mmpanels 2400x1200mm2.88m²6.9 kg/m2( balsa 30mm + on both sides biaxial fiber 600g + epoxy + tear-off fabric)
High temperature vacuum plug BSP, 210°C
High temperature vacuum plug BSP, 210°C
€18.47
(VAT incl.)
In stock
High temperature vacuum plug in BSP
Medium 211 epoxy infusion hardener 114 Pro-set 1.37kg
Medium 211 epoxy infusion hardener 114 Pro-set 1.37kg
€74.05
(VAT incl.)
On order. Delay of about 3 to 4 weeks.
Medium 211 epoxy infusion hardener 114 Pro-set 1.37kg
PET breathable fabric. To evacuate air from a laminate before and during curing. Max: 210°C. 150G/m². Width: 152cm
PET breathable fabric. To evacuate air from a laminate before and during curing. Max: 210°C. 150G/m². Width: 152cm
€6.38
(VAT incl.)
In stock
Breathable fabric used to evacuate air from a laminate before and during curing.Maximum use: up to 210°c150G/m² weightWidth: 152cmSold by 5 meters minimum
DuFLEX® Balsa 26.3mm, panels 2400x1200mm, 2.88m², 6.9 kg/m².
DuFLEX® Balsa 26.3mm, panels 2400x1200mm, 2.88m², 6.9 kg/m².
€1,053.68
(VAT incl.)
On order : 4 weeks delay
DuFLEX® Balsa 26.3mmpanels 2400x1200mm2.88m²6.9 kg/m2( balsa 25mm + on both sides biaxial fiber 600g + epoxy + tear-off fabric)
Slow Curing Agent 212 for Epoxy Infusion 114 Pro-set 1.37kg
Slow Curing Agent 212 for Epoxy Infusion 114 Pro-set 1.37kg
€74.05
(VAT incl.)
In stock
Slow Curing Agent 212 for Epoxy Infusion 114 Pro-set 1.37kg
Pink vacuum bagging film for infusion. Maximum use up to 204°C. Width: 150cm, thickness: 50microns
Pink vacuum bagging film for infusion. Maximum use up to 204°C. Width: 150cm, thickness: 50microns
€3.58
(VAT incl.)
In stock
Pink vacuum bagging film made of modified single-layer nylon for better stability at high temperatures.
For high pressure oven and autoclave curing.
It is generally used for autoclave treatment of epoxy and BMI...
DuFLEX® Balsa 20.3mm, panels 2400x1200mm, 2.88m², 5.2 kg/m².
DuFLEX® Balsa 20.3mm, panels 2400x1200mm, 2.88m², 5.2 kg/m².
€939.01
(VAT incl.)
On order : 4 weeks delay
DuFLEX® Balsa 20.3mmpanels 2400x1200mm2.88m²5.2 kg/m2( balsa 19mm + on both sides biaxial fiber 600g + epoxy + tear-off fabric)
Epoxy glue brushes. For gluing and coating applications. WEST SYSTEM. x100
Epoxy glue brushes. For gluing and coating applications. WEST SYSTEM. x100
€111.72
(VAT incl.)
In stock
Glue brushes, wooden handle, practical and disposable
Packaging: 100 brushes
Associated products:
- Reusable graduated mixing pot. Ref: WS805
- Flexible coating squeegees. Ref: WS808-12
- Reusable notched spatula....