English GB
WEST SYSTEM 205 Fast Hardener is a medium viscosity epoxy hardener.
It is useful in most bonding situations, and at lower temperatures.
The combination of 105 resin and 205 hardener provides excellent adhesion and coating properties.
Pump required: Model A pump - ws301A
Sold without pumps.
For professionals, for all requests for discounted prices on West System products, please contact us to obtain your quote.
Hardener 205 is used in most situations to achieve a fast cure that produces an epoxy with rapid physical properties.
It is useful for bonding, and at lower temperatures.
When mixed with 105 resin, at a ratio of 5:1 (resin:hardener), the cured resin/hardener mixture produces a rigid, high-strength solid with excellent cohesive properties and outstanding water vapor barrier with excellent bonding and coating properties.
Pot life at 25°C: 10 to 15 minutes
Cure to solid at 21°C: 5 to 7 hours
Curing to full strength at 21°C: 5 to 7 days
Minimum recommended working temperature: 5°C
Dosing: The mini-pumps allow you to pour the exact proportions of resin and hardener. In order to have the correct proportions, it is sufficient to make one pressure of resin for one pressure of hardener.
Mixing: Mix the resin and hardener for two minutes or longer at low temperatures. Scrape down the sides and bottom of the pot when mixing.
Consumption :
- for a 1kg mixture on a porous surface at 25°C: 6.5 - 7.5 m².
- for a 1kg mixture on a non-porous surface at 25°C : 8.5 - 9.5 m².
How to dose and mix your epoxy ?
Demonstration video on basic, advanced and repair techniques
Demonstration video of dosing and mixi
Data sheet
Specific References
Please sign in first.
Sign in
Français 
Español 
Português PT 
