Vacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
Filter By
Filter By
Vacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
Filter By
Microporous vacuum line for fast air, width 300mm 150°c
Microporous vacuum line for fast air, width 300mm 150°c
€16.01
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Microporous vacuum line for fast airwidth 300mm 150°c
Microporous vacuum line for fast air, width 150mm 150°c
Microporous vacuum line for fast air, width 150mm 150°c
€7.75
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Microporous vacuum line for fast airwidth 150mm 150°c
Polyethylene spiral tube for resin infusion. Diameter: 12mm. Thickness: 1mm.
Polyethylene spiral tube for resin infusion. Diameter: 12mm. Thickness: 1mm.
€1.02
(VAT incl.)
In stock75 produit(s)
Vacuum and infusion devices. Spiral wrap
10mm x 100m PVS12
Material: PE (polyethylene)
Diameter: 10mm
100 ml long
Thickness: 1mm +/-0.1
Maximum temperature of use: 100°C
Sold by 5ml minimum
Complementary products...
Polyethylene spiral tube for resin infusion. Diameter: 10mm. Thickness: 1mm.
Polyethylene spiral tube for resin infusion. Diameter: 10mm. Thickness: 1mm.
€0.91
(VAT incl.)
In stock70 produit(s)
Vacuum and infusion devices. Spiral wrap
10mm x 100m PVS10
Material: PE (polyethylene)
Diameter: 10mm
100 ml long
Thickness: 1mm +/-0.1
Maximum temperature of use: 100°C
Sold by 5ml minimum
Complementary products...
Polyethylene spiral tubing for resin infusion. Diameter: 18mm x 1.5 mm thick
Polyethylene spiral tubing for resin infusion. Diameter: 18mm x 1.5 mm thick
€1.44
(VAT incl.)
In stock70 produit(s)
Vacuum and infusion devices. Spiral wrap
10mm x 100m PVS18 HDPE
Material: PE (polyethylene)
Diameter: 18mm
100 ml long
Thickness: 1.5mm +/-0.1
Maximum temperature of use: 100°C
Sold by 5ml minimum
Complementary...
Polyethylene tube for resin infusion. Diameter of 10mm. Working temperature: 100°C
Polyethylene tube for resin infusion. Diameter of 10mm. Working temperature: 100°C
€1.10
(VAT incl.)
In stock170 produit(s)
Vacuum and infusion devices. Polyethylene tubing for resin infusion.
10mm x 100m PVS10
Material: PE (polyethylene)
Diameter: 10mm
100 ml long
Thickness: 1mm +/-0.1
Maximum temperature of use: 100°C
Sold by 5ml...
Polyethylene HOSE for resin infusion. Diameter of 12mm. Working temperature: 100°C
Polyethylene HOSE for resin infusion. Diameter of 12mm. Working temperature: 100°C
€1.10
(VAT incl.)
In stock140 produit(s)
Vacuum and infusion devices. Polyethylene tubing for resin infusion.
10mm x 100m
Material: PE (polyethylene)
Diameter: 12mm
100 ml long
Thickness: 1mm +/-0.1
Maximum temperature of use: 100°C
Sold by 5ml minimum...