Vacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
Filter By
Filter By
Vacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
Filter By
Microporous vacuum line for fast air, width 300mm 150°c
Microporous vacuum line for fast air, width 300mm 150°c
€16.01
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Microporous vacuum line for fast airwidth 300mm 150°c
Microporous vacuum line for fast air, width 150mm 150°c
Microporous vacuum line for fast air, width 150mm 150°c
€7.75
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Microporous vacuum line for fast airwidth 150mm 150°c
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 3mm x10mm x15ml
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 3mm x10mm x15ml
€7.45
(VAT incl.)
In stock22 produit(s)
Self-adhesive sealing compound for low temperature ( 150°C)
Recommended for vacuum infusion, wet process technique.
Compatible with most vacuum bagging films.
It is recommended to remove the sealant at room...
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 2mmx10mmx22.5ml
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 2mmx10mmx22.5ml
€8.70
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Self-adhesive sealing compound for low temperature ( 150°C)
Recommended for vacuum infusion, wet process technique.
Compatible with most vacuum bagging films.
It is recommended to remove the sealant at room...
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 3mmx12mmx15ml
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 3mmx12mmx15ml
€9.53
(VAT incl.)
In stock18 produit(s)
Self-adhesive sealing compound for low temperature ( 150°C)
Recommended for vacuum infusion, wet process technique.
Compatible with most vacuum bagging films.
It is recommended to remove the sealant at room...
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 400cm, thickness: 75microns
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 400cm, thickness: 75microns
€8.28
(VAT incl.)
In stock140 produit(s)
Ideal for resin infusion and prepreg molding applications.
Suitable for all commonly used resin systems.
Not suitable for autoclave use for composite processing.
PRO-VAC 100-LB-75 IN/PA
4mx150ml
Sold by 5 ml minimum
Vacuum hose, ⌀13mm, 60°C
Vacuum hose, ⌀19mm, 60°C
Vacuum hose, ⌀19mm, 60°C
€3.31
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Vacuum hose reinforced in PVC