Vacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
Filter By
Filter By
Vacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
Polyethylene spiral tube for resin infusion. Diameter: 12mm. Thickness: 1mm.
Polyethylene spiral tube for resin infusion. Diameter: 12mm. Thickness: 1mm.
€1.02
(VAT incl.)
In stock75 produit(s)
Vacuum and infusion devices. Spiral wrap
10mm x 100m PVS12
Material: PE (polyethylene)
Diameter: 10mm
100 ml long
Thickness: 1mm +/-0.1
Maximum temperature of use: 100°C
Sold by 5ml minimum
Complementary products...
Polyethylene spiral tube for resin infusion. Diameter: 10mm. Thickness: 1mm.
Polyethylene spiral tube for resin infusion. Diameter: 10mm. Thickness: 1mm.
€0.91
(VAT incl.)
In stock75 produit(s)
Vacuum and infusion devices. Spiral wrap
10mm x 100m PVS10
Material: PE (polyethylene)
Diameter: 10mm
100 ml long
Thickness: 1mm +/-0.1
Maximum temperature of use: 100°C
Sold by 5ml minimum
Complementary products...
Polyethylene spiral tubing for resin infusion. Diameter: 18mm x 1.5 mm thick
Polyethylene spiral tubing for resin infusion. Diameter: 18mm x 1.5 mm thick
€1.44
(VAT incl.)
In stock70 produit(s)
Vacuum and infusion devices. Spiral wrap
10mm x 100m PVS18 HDPE
Material: PE (polyethylene)
Diameter: 18mm
100 ml long
Thickness: 1.5mm +/-0.1
Maximum temperature of use: 100°C
Sold by 5ml minimum
Complementary...
Polyethylene T-connector for vacuum infusion. Max: 100°C. Diameter: 18mm. PRO-VAC /10U
Polyethylene T-connector for vacuum infusion. Max: 100°C. Diameter: 18mm. PRO-VAC /10U
€0.49
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Polyethylene T-connector for vacuum infusion. PVT-18Materials: PE (polyethylene)Diameter: 18 mmMaximum operating temperature: 100°C
Polyethylene infusion valve diameter 18mm L100mm up to 100°c
Polyethylene infusion valve diameter 18mm L100mm up to 100°c
€1.40
(VAT incl.)
In stock100 produit(s)
Valve for polyethylene infusion diameter 18mm L100mm up to 100°c
Polyethylene infusion valve diameter 10mm L100mm up to 100°c
Polyethylene infusion valve diameter 10mm L100mm up to 100°c
€1.16
(VAT incl.)
In stock37 produit(s)
Polyethylene infusion valve diameter 10mm L100mm up to 100°c
L-shaped connector for polyethylene input blocks, diameter 18mm, up to 100°c
L-shaped connector for polyethylene input blocks, diameter 18mm, up to 100°c
€1.02
(VAT incl.)
In stock103 produit(s)
L-connector for polyethylene inlet blockdiameter18mmmaximum temperature of use of the connector up to 100°c
To be used with the polyethylene infusion inlet block (REF: PRO46261)
L-connector for polyethylene input blocks, diameter 12mm, up to 100°c
L-connector for polyethylene input blocks, diameter 12mm, up to 100°c
€1.00
(VAT incl.)
In stock43 produit(s)
L-shaped connector for polyethylene input blocksdiameter12mmup to 100°c
To be used with the polyethylene infusion inlet block (REF: PRO46261)
Polyethylene T-connector for vacuum infusion. Max: 100°C. Diameter: 12mm. PRO-VAC /10U
Polyethylene T-connector for vacuum infusion. Max: 100°C. Diameter: 12mm. PRO-VAC /10U
€0.42
(VAT incl.)
In stock47 produit(s)
Polyethylene T-connector for vacuum infusion. PVT-12Materials: PE (polyethylene)Diameter: 12 mmMaximum operating temperature: 100°C
Polyethylene T-connector for vacuum infusion. Max: 100°C. Diameter: 10mm. PRO-VAC
Polyethylene T-connector for vacuum infusion. Max: 100°C. Diameter: 10mm. PRO-VAC
€0.36
(VAT incl.)
In stock62 produit(s)
Polyethylene T-connector for vacuum infusion. PVT-10Materials: PE (polyethylene)Diameter: 10 mmMaximum operating temperature: 100°C
Polyethylene vacuum infusion inlet block. 16mm diameter x 35mm high. Maximum use: 100°c
Polyethylene vacuum infusion inlet block. 16mm diameter x 35mm high. Maximum use: 100°c
€2.54
(VAT incl.)
In stock35 produit(s)
Polyethylene vacuum infusion inlet block.
16mm diameter x 35mm high.
Maximum use: 100°c
Polyethylene infusion valve diameter 12mm L100mm up to 100°c
Polyethylene infusion valve diameter 12mm L100mm up to 100°c
€1.00
(VAT incl.)
In stock97 produit(s)
Polyethylene infusion valve diameter 12mm L100mm up to 100°c
Polyethylene tube for resin infusion. Diameter of 10mm. Working temperature: 100°C
Polyethylene tube for resin infusion. Diameter of 10mm. Working temperature: 100°C
€1.10
(VAT incl.)
In stock175 produit(s)
Vacuum and infusion devices. Polyethylene tubing for resin infusion.
10mm x 100m PVS10
Material: PE (polyethylene)
Diameter: 10mm
100 ml long
Thickness: 1mm +/-0.1
Maximum temperature of use: 100°C
Sold by 5ml...
Vacuum hose, ⌀13mm, 60°C
Vacuum hose, ⌀19mm, 60°C
Vacuum hose, ⌀19mm, 60°C
€3.31
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Vacuum hose reinforced in PVC