Vacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
Filter By
Filter By
Vacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
Filter By
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 100cm, thickness: 75microns
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 100cm, thickness: 75microns
€1.44
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
For polyester and vinylester infusion systems.
Ideal for large, complex parts
Due to its structure, this product is less sensitive to moisture variations
1mx100ml
Sold by 5 ml minimum
Microporous vacuum line for fast air, width 300mm 150°c
Microporous vacuum line for fast air, width 300mm 150°c
€16.01
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Microporous vacuum line for fast airwidth 300mm 150°c
Microporous vacuum line for fast air, width 150mm 150°c
Microporous vacuum line for fast air, width 150mm 150°c
€7.75
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Microporous vacuum line for fast airwidth 150mm 150°c
Black slow-flow draining net in 3D PE mesh, 160g/m² 120°c , 100cm width
Black slow-flow draining net in 3D PE mesh, 160g/m² 120°c , 100cm width
€2.95
(VAT incl.)
In stock172 produit(s)
Black slow-flow draining net in 3D PE mesh160g/m² 120°c100cm wide
Drainage net fast flow green. Favors the impregnation of fabrics. Guides and brings the resin to the entire surface
Drainage net fast flow green. Favors the impregnation of fabrics. Guides and brings the resin to the entire surface
€4.33
(VAT incl.)
Delay of 2 weeks0 produit(s)
Fast flow draining net, green230g/m² 120°c , 120cm wide
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 3mm x10mm x15ml
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 3mm x10mm x15ml
€7.45
(VAT incl.)
In stock22 produit(s)
Self-adhesive sealing compound for low temperature ( 150°C)
Recommended for vacuum infusion, wet process technique.
Compatible with most vacuum bagging films.
It is recommended to remove the sealant at room...
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 2mmx10mmx22.5ml
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 2mmx10mmx22.5ml
€8.70
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Self-adhesive sealing compound for low temperature ( 150°C)
Recommended for vacuum infusion, wet process technique.
Compatible with most vacuum bagging films.
It is recommended to remove the sealant at room...
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 3mmx12mmx15ml
Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 3mmx12mmx15ml
€9.53
(VAT incl.)
In stock18 produit(s)
Self-adhesive sealing compound for low temperature ( 150°C)
Recommended for vacuum infusion, wet process technique.
Compatible with most vacuum bagging films.
It is recommended to remove the sealant at room...
Vacuum hose, ⌀13mm, 60°C
Vacuum hose, ⌀19mm, 60°C
Vacuum hose, ⌀19mm, 60°C
€3.31
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Vacuum hose reinforced in PVC