Nylon 66 peel ply for composite treatments. Maximum temperature of use: 210°C. Width: 150cm. 85g/m²
Nylon 66 tear away fabrics
Designed for composite treatments.
Allows to leave a finish that facilitates sanding.
Do not use with phenolic resins (for nylon)
1500mm x 100ml
The tear-off cloth allows you to remove the amine-contaminated resin layer. When you resume your work, simply tear off the cloth instead of sanding it again and pick up where you left off. By tearing off the tear-off cloth you remove the polluting solvents.
85g/m² heat-set nylon 66® tear-off fabric.
Has a red tracer as a visible indicator to reduce the possibility of leaving a peeling layer.
The fabric leaves a finish that can facilitate sanding.
Maximum operating temperature: 210°C
We do not recommend the use of this product with phenolic resins.
It is recommended to store the tear-off tissues in a cool and dry environment. Recommended storage temperature is between 10 and 30°C and relative humidity between 50 and 75%. The peel ply should remain in the packaging until it is used.
Data sheet
- Width
- 150cm
- Weight/m²
- 85g/m²
- Matter
- Nylon
- Max. operating temperature
- 210°C
- Special fabrics and films
- Nylon pull-off fabrics