Teak floor satin oil - 1L - Easy Oil
Easy Oil is an impregnating oil for parquet, wooden floors and woodwork.
Application in 2 coats without wiping.
Appearance: silk matt
Permanently impregnates the parquet surface, protects it from dust and moisture and ensures good chemical resistance.
Permanently impregnates the surface of the floor, protects it from dust and moisture and ensures good chemical resistance.
Gives the floor a beautiful warmth and enhances the grain.
INITIAL OILING ON SANDED PARQUET: approx. 25 m2 per litre per coat.
MAINTENANCE OILING: approx. 25 to 35 m2 per litre per coat.
Application:
- EASY OIL is ready to use and can be used pure.
- Stir well before use. Do not impregnate a floor at temperatures below 12°C. Use only in well ventilated areas.
- Apply a first thin coat of EASY OIL with a short nap roller (5 mm lacquer) in the direction of the wood or if this is not possible in the direction of the light. Use a brush or spalter for the edges of the workpieces. The use of a spray gun is possible on vertical surfaces, furniture and worktops.
- After drying, roughen the surface with a fine abrasive (used 120 grit or 150 grit), dust very carefully and then wipe with a slightly damp microfibre cloth to remove any trace of dust, however small.
- Apply the second coat in the same way as the first. Each coat should be very thin, about 25 m2/L/coat.