No products
Prices are tax included
Adjust the strength, weight, texture, sandability and color of the cured epoxy with one of the eight WEST SYSTEM fillers. Adjust the viscosity of the resin/hardener mixture according to the amount of filler added.
There are several packages of fillers that you can choose from when you are on the product sheet.
Loads
11,36 € In Stock406 filler: Colloidal silica
General purpose thickener additive used for bonding, filling voids and holidays. Can be used to prevent epoxy from flowing along vertical or ceiling surfaces. Used to control the viscosity. Often used in combination with other fillers to control the working characteristics of an epoxy mixture, for example to improve the consistency of the profiling...
11,36 €40 In Stock
12,20 € In Stock405 filler: filleting blend
The 405 is a durable, wood-colored putty for a natural finish. Can be mixed with products from the WEST SYSTEM range (G / Flex, G / 5 ...) Ideal for fixing partitions on the sides of the hull, bottom of hull. Add 15 to 25% by weight
12,20 €7 In Stock
12,29 € In Stock403 filler: microfibres
Filler composed of cellulosic cotton fiber, has good impregnation ability to fill voids For use with the WEST SYSTEM range (G / 5, G / Flex ...) Add 4 to 16% by weight
12,29 €29 In Stock
12,84 € In Stock409 filler: microsphere blend
A pure white, hollow glass bublle based, low density filler designed for filling and fairing of fibreglass. When the filler is mixed with epoxy at a ratio of 10% to 25% by weight, it creates a smooth creamy paste for filling and fairing over glass fibre repairs. The cured epoxy/filler is very easy to sand. Being white in coulour the cured epoxy filler mix...
12,84 €21 In Stock
14,10 € In Stock404 filler: high-density
High density charge used for bonding materials. To increase the load capacity of the epoxy blend, you can add chopped fiberglass or carbon fiber. Depending on the desired viscosity, add 30 to 60% by weight.
14,10 €31 In Stock
15,10 € In Stock410 filler: microlight
Ideal low-density charge to create a lightweight profiling component, easy to handle and particularly suitable for large surface profiling. This load is 30% easier to sand Add 7 to 16% by weight
15,10 €27 In Stock
17,47 € In Stock402 filler: milled glass fibre
The filler 402 is a high density filler consisting of loose chopped glass. The finished repairs are incredibly strong, resilient and resilient. When mixed with the epoxy, the result is a thick paste that can be carefully set up with a brush and can be held in place with PVC tape or a tear-off fabric to give a smooth finish to the repair. This load is used...
17,47 €22 In Stock
20,00 € In Stock407 filler: low density
The 407 filler is composed of microbeads used to make profiling mastics that are easy to sand while remaining strong on a comparative strength / weight basis. Can be applied by trowel. Add 20 to 40% by weight to the epoxy mixture.
20,00 €31 In Stock
