English GB
Français 
Español 
Português PT 
Reference:
PRO86212
Green vacuum bagging film for infusion. Maximum use up to 200°C. Width: 150cm, thickness: 50microns
Vacuum bagging film for medium and high temperature oven and autoclave processing.
Strong but flexible nylon monolayer film.
Developed for use prior to curing.
Suitable for all pretreatments
Roll : 1.5mx150ml
Sold by 5 ml minimum
€2.08
(VAT incl.)
Vacuum bagging film for medium and high temperature oven and autoclave processing.
Strong but flexible nylon monolayer film.
Developed for use prior to curing.
Suitable for all pretreatments
Width: 150cm
Thickness: 50µ
Roll : 1.5mx150ml
Sold by 5 ml minimum
PRO86212
Data sheet
- Width
- 150cm
- Thickness
- 50 microns
- Brands
- PRO-VAC
- Matter
- Nylon
- Max. operating temperature
- 200°C
- Color
- Green
- Vacuum tarpaulins
- Temperature 200°c
Related products
INF-114 : Epoxy Infusion Resin | PRO-SET
€120.44
(VAT incl.)
In stock3 produit(s)
Ideal for infusion techniques
Designed for the manufacture of lightweight, high performance composites
Low viscosity and multiple hardeners for customised cure times
For use with hardeners INF-210, INF-211,...
Fast hardener 210 for epoxy infusion 114 Pro-set 1.37kg
€81.89
(VAT incl.)
In stock1 produit(s)
INF-210 Fast Infusion HardenerFast Infusion Hardener 210 for Epoxy Infusion 114
Teflon adhesive silicone sheet used for demolding. Width: 1000mm. Max use: up to 320°c
€74.14
(VAT incl.)
In stock27 produit(s)
Teflon coated glass fabric used for demolding. Non-developable.Adheres to metal and wooden moldsStable during curing and autoclaveRecommended for use on flat or single curved surfacesCan be assembled with a butt...
Polyester adhesive tape with silicone 25mm x 66ml, 180°c
€23.57
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Polyester adhesive tape with silicone 25mm x 66ml, 180°c
Polyethylene spiral tubing for resin infusion. Diameter: 18mm x 1.5 mm thick
€1.44
(VAT incl.)
In stock70 produit(s)
Vacuum and infusion devices. Spiral wrap
10mm x 100m PVS18 HDPE
Material: PE (polyethylene)
Diameter: 18mm
100 ml long
Thickness: 1.5mm +/-0.1
Maximum temperature of use: 100°C
Sold by 5ml minimum
Complementary...
L-shaped connector for polyethylene input blocks, diameter 18mm, up to 100°c
€1.02
(VAT incl.)
In stock103 produit(s)
L-connector for polyethylene inlet blockdiameter18mmmaximum temperature of use of the connector up to 100°c
To be used with the polyethylene infusion inlet block (REF: PRO46261)