Teak Floor Matt Oil - 1L - Easy Oil

Permanently impregnates the surface of the floor, protects it from dust and moisture and ensures good chemical resistance.

Gives the floor a beautiful warmth and enhances the grain. 

INITIAL OILING ON SANDED PARQUET: approx. 25 m2 per litre per coat.

MAINTENANCE OILING: approx. 25 to 35 m2 per litre per coat.

Application: 

- EASY OIL is ready to use and can be used pure.

- Stir well before use. Do not impregnate a floor at temperatures below 12°C. Use only in well ventilated areas.

- Apply a first thin coat of EASY OIL with a short nap roller (5 mm lacquer) in the direction of the wood or if this is not possible in the direction of the light. Use a brush or spalter for the edges of the workpieces. The use of a spray gun is possible on vertical surfaces, furniture and worktops.

- After drying, roughen the surface with a fine abrasive (used 120 grit or 150 grit), dust very carefully and then wipe with a slightly damp microfibre cloth to remove any trace of dust, however small.

- Apply the second coat in the same way as the first. Each coat should be very thin, about 25 m2/L/coat.