Reference:
ST500

Stratiprim 500g, adhesion and bonding primer.

Polyurethane resin that has a component used as an adhesion pre-coat before the application of "polyester resin laminate" or polyurethane glue on absorbent substrates, mainly on wood and porous or friable materials.

Primer for bonding and adhesion

Read more
€20.60 (VAT incl.)
In stock 2 Items

   

Description

Polyurethane resin which has a component used as a pre-bonding layer before the application of "polyester resin laminate" or polyurethane glue on absorbent substrates, mainly on wood and porous or friable materials.

"Stratiprim" is indispensable to obtain the maximum cohesion in the case of lamination on wood, plywood, chipboard etc... .
Moreover, the product "Stratiprim" causes a hardening of wood such as Teak, lamination and gluing in construction, ship repair, caravanning, swimming pools ...

Easy application by roller or brush. Penetrates and cures deeply, consolidates powdery substrates, protects from humidity, allows complete curing of the polyester laminate at the wood/polyester interface.
Increases adhesion (breakage occurs in wood) and is resistant to chemicals.

Substrates must be dry and free of dust, grease, oil, moisture.
The product "Stratiprim" is ready to use. The application is done with a brush or roller. The resin obtained is very hard and makes a complete closure of the capillaries of the support.

Polyester laminate or polyurethane bonding :
Apply the "Stratiprim" (about 1 hour before the application of the polyester).
Depending on the porosity of the support, apply one or two coats so that the wood is well gorged, but without making the surface shiny (100 to 200 gr/m2); wipe the shiny areas with a cloth. Wait 1 to 2 hours depending on the temperature (solvents must have evaporated).
As soon as the film becomes tacky, lamination can start and continue until the "Stratiprim" film is dry to the touch (but not hardened). A top surface should not be prepared for 2 to 3 hours (depending on temperature).

COVERAGE :
Approximately 9m².

SAFETY :
The "Stratiprim" pre-coat contains flammable solvents. Effective ventilation is essential in closed enclosures and wherever there is a risk of vapour accumulation. Do not smoke during application.
Keep away from all incandescent sources. Wear gloves and a respiratory mask.

CLEANING :
Fresh stains can be cleaned with P.U. Thinner.

PACKAGING STORAGE :
Approximately 4 months in a cool room in intact packaging, protected from bad weather.

Away from foodstuffs.

N.B.: Control of raw materials and self-checking of the finished product by the manufacturer.

These instructions are based on our experience to date and on carefully conducted tests. However, we cannot take responsibility for the material success of your work, as we are not familiar with the particular conditions of implementation and have no influence on your working methods.
*** Translated with www.DeepL.com/Translator (free version) ***


Read more
Product Details
ST500
Related products

(1 review)
€66.36 (VAT incl.)
In stock3 produit(s)
Two-component polyurethane resin specially designed for leveling and patching floors, especially wooden floors, defective tiles, metal substrates and all flexing substrates.CONSUMPTION:1.5 kg / m2 and per mm of...

(1 review)
€40.51 (VAT incl.)
In stock55 produit(s)
Single-component, self-leveling hybrid parquet adhesive, applicable with a notched trowel.Specially designed for gluing solid wood and engineered wood flooring (strips, continuous strips, edge strips, panel boards),...

€180.72 (VAT incl.)
In stock7 produit(s)
Two-component polyurethane resin specially designed for leveling and patching floors, especially wood floors, defective tiles, metal substrates and all flexing substrates. Perfect under a carpet, under a plastic floor...

Menu