DUFLEX Divinycell12.6mm, panneaux 2400x1200mm 2.88m² 5.9 kg/m² (+Divinycell foam)

Dimension: 2400x1200 mm

Thickness 12.6 mm

Weight: 5.9 kg/m² (11.5 lbs)

Surface area : 2.88m² (2.88 sq. ft.)

600g of E-Glass Biaxial on each side of the panel (includes tear away fabric to protect the laminates from contamination and to reduce the preparation time required before gluing)

    Strength
    Durability and resistance to damage
    Lightweight
    Dimensionally stable


DuFLEX® panels are specifically designed to reduce construction time and optimize the weight of high-performance composite structures. The time-consuming lamination and vacuum bagging steps normally required to manufacture high-performance composites are avoided, and material waste, labor and tooling costs are significantly reduced. They allow you to focus on your high-value work.  

DuFLEX® foam panels have either linear or cross-linked structural foam cores. The closed-cell foams in structural panels combine high stiffness and strength-to-weight ratio with superior toughness. The cores are non-friable, contain no CFCs and have negligible water absorption.

The structural foams used in DuFLEX® composite panels offer low weight, excellent stiffness, good impact resistance, and good acoustic and thermal insulation.

Typical applications for structural foam panels include hulls, decks, ship superstructures and bulkheads, floors, walls, roof and body panels, front and side skirts, car floors and truck bodies, and long-span roofs and bulkheads.

Divinycell® panels offer excellent mechanical properties at a low weight. The unique combination of polyurene and pvc, which offers impressive mechanical performance, is ideal for applications subject to fatigue, slamming or impact. Other key features include excellent chemical resistance, low water absorption and good thermal/acoustic insulation.

Panel bonding: Z-seal (scarf cut option)
DuFLEX® panels can optionally be supplied with both long and/or short edges pre-machined for easy assembly. The Z-joint provides a smooth and even surface profile. The Z-joint should be bonded after impregnation with a mixture of epoxy adhesive and WS409 filler.

Choose the scarf cut option:
If you wish to have a scarf cut to facilitate the gluing of the panels, you can choose if you want the cut in the length or width as well as the number of machining you want.

Panel cutting option with digital control:
If you wish to receive your panels pre-cut to your dimensions, you can select this option. It will be necessary to provide us your plans by e-mail to serviceclient@resine-net.com in DWG format. Count on a delay of 4 to 5 weeks.
*** Translated with www.DeepL.com/Translator (free version) ***