Pneumatic applicator gun to extrude. For application of adhesives, silicones, seals. For 600ml bags. Lacmé

2-in-1 extrusion gun for the application of adhesives, silicones, caulking gaskets, sanitary gaskets, insulation joints for exterior joinery.

Characteristics :

Inner diameter tank: 50 mm
Operating pressure: 5-6 bar
Average consumption: 150 l / min
Compressor recommended: min 12 m3 / h
Air connection: 1/4 "
Recommended hose: diam. int.6 mm
Weight: 0.88 kg
Dimensions: 400 x 230 mm>

Equipment :

Aluminum body with ergonomically centered handle
Large capacity aluminum tank
Progressive trigger
Air flow regulator
Set of 3 nozzles for bags (up to 600 ml)

Connection: The extrusion gun is delivered with a connection nozzle. The accessories are equipped with quick couplings allowing an immediate connection by snapping into the couplers which equiprent all the pipes. When "disengaging", the couplers close automatically, thus avoiding to operate the valves on which the hoses are connected.

Filtration and lubrication: Two precautions to be observed when using pneumatic tools.

=> The filtering: All pneumatic tools must be supplied with dry air and free of impurities, hence the need to insert a scrubber-regulator between the compressor and the tool, which allows to filter and adjust the pressure.

=> Lubrication: Pneumatic power tools must be REQUIRED LUBRICATED. It is therefore necessary to insert a lubricator between the tool and the purifier-holder.