Epoxy glue FFE-200. For leveling and final bonding of teak panels and boards/decks. Teackdecking Systems. 7,6L
Two-component epoxy glue for teak decks
Lightweight, flexible, easy to sand.
Can be worked at temperatures up to 7°C.
Does not require primer. Cookie color.
Ratio of 1 : 1.
Consumption : from 0.8m² to 1.2m².
Also available in 1.5L
TDS FFE-200 1:1 Fairing & Bonding Epoxy is a custom blended epoxy mastic of high quality resins, activators and engineered fillers to yield a blush-free, light weight,flexible andasily-sanded system used for both leveling and the final bonding of teak panels or planks. TDS FFE-200 weighs only 0,85 kg per litre when cured and its cell-like structure makes it an excellent sound and thermal insulator. The viscosity of the TDS FFE-200 is formulated to be high enough to remain in place when used for deck
fairing, but low enough to provide excellent wet-out for bonding. The TDS FFE-200 Fairing & Bonding Epoxy will cure in temperatures as low as 7º C. Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed. Once thoroughly mixed, the material can be spread immediately, requiring no induction time. See Properties Chart at the end of this document for cure specifications. TDS FFE-200 Fairing & Bonding Epoxy is D.O.T. non-corrosive so it does not require hazardous labeling for shipment.
His advantages :
• Good bond strength
• Excellent fairing material
• Excellent wet-out of bonding surfaces
• Best for vacuum bagging
• Medium viscosity for ease of spreading and leveling
• Flexible strength resists shock and twist
• Light weight fillers for reduced weight and sand-ability
• Good low temperature cure down to 45°F, 7°C
• 1:1 mix ratio for easy mixing