Supplies and special adhesives (2)

Polyethylene T-connector for vacuum infusion. Max: 100°C. Diameter: 10mm. PRO-VAC

€0.36 (VAT incl.)

In stock62 produit(s)

Polyethylene T-connector for vacuum infusion. PVT-10Materials: PE (polyethylene)Diameter: 10 mmMaximum operating temperature: 100°C

Add to cart

Bloc d'entrée d'infusion en polyéthylène diamètre 16mm ext 35mm juste a 100°c

Polyethylene vacuum infusion inlet block. 16mm diameter x 35mm high. Maximum use: 100°c

€2.54 (VAT incl.)

In stock35 produit(s)

Polyethylene vacuum infusion inlet block. 16mm diameter x 35mm high. Maximum use: 100°c

Add to cart

Valve pour infusion en polyéthylène diamètre 12mm L100mm juste a 100°c

Polyethylene infusion valve diameter 12mm L100mm up to 100°c

€1.00 (VAT incl.)

In stock97 produit(s)

Polyethylene infusion valve diameter 12mm L100mm up to 100°c

Add to cart

High temperature breach, 50mm BSP, 210°C

€37.24 (VAT incl.)

In stock10 produit(s)

Connector for high temperature BSP vacuum

Add to cart

Mastic d’étanchéité HT auto-collant ép3mm x12mm x15ml pour films de vide 180°c

Self-adhesive high temperature sealant. For vacuum bagging films. 3mm x12mm x15ml, 180°C

€12.84 (VAT incl.)

On order. Delay of about 3 to 4 weeks.0 produit(s)

Self-adhesive sealing compound for high temperature (180°C) cream color Specially designed for high temperature oven and autoclave processing Compatible with most vacuum bagging films. Thickness 3mm x12mm x15ml

Add to cart

Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 3mm x10mm x15ml

€7.45 (VAT incl.)

In stock22 produit(s)

Self-adhesive sealing compound for low temperature ( 150°C) Recommended for vacuum infusion, wet process technique. Compatible with most vacuum bagging films. It is recommended to remove the sealant at room...

Add to cart

Tuyau silicone avec ressort anti rétraction et prise femelle 3m

€251.10 (VAT incl.)

In stock2 produit(s)

Add to cart

Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 2mmx10mmx22.5ml

€8.70 (VAT incl.)

On order. Delay of about 3 to 4 weeks.0 produit(s)

Self-adhesive sealing compound for low temperature ( 150°C) Recommended for vacuum infusion, wet process technique. Compatible with most vacuum bagging films. It is recommended to remove the sealant at room...

Add to cart

Self-adhesive sealing compound for vacuum infusion bags. For low temperature (150°c). Thickness 3mmx12mmx15ml

€9.53 (VAT incl.)

In stock18 produit(s)

Self-adhesive sealing compound for low temperature ( 150°C) Recommended for vacuum infusion, wet process technique. Compatible with most vacuum bagging films. It is recommended to remove the sealant at room...

Add to cart

PTFE Silicone Adhesive Tape 25mm 33m, 260°c

€112.91 (VAT incl.)

On order. Delay of about 3 to 4 weeks.0 produit(s)

Non-reinforced high-temperature silicone PTFE adhesive tape, 25mm wide, 33m long, 260°C

Add to cart

Teflon sheet Width 1000mm Silicone adhesive just at 320°c for deviation surface.

Teflon adhesive silicone sheet used for demolding. Width: 1000mm. Max use: up to 320°c

€74.14 (VAT incl.)

In stock27 produit(s)

Teflon coated glass fabric used for demolding. Non-developable.Adheres to metal and wooden moldsStable during curing and autoclaveRecommended for use on flat or single curved surfacesCan be assembled with a butt...

Add to cart

Spray glue for infusion and RTM (polyester, vinylester and epoxy compatible) 500ml

€24.16 (VAT incl.)

In stock15 produit(s)

PRO-FIX 51 is designed to be used in the manufacture of polyester, vinylester or epoxy composite parts - especially using infusion and RTM technologies - for dry positioning of base materials in molds.High adhesion to...

Add to cart

PRO-VAC Omega profile ⌀16mm

€5.99 (VAT incl.)

In stock4 produit(s)

Omega profile in PVC

Add to cart

Polyethylene tube for resin infusion. Diameter of 10mm. Working temperature: 100°C

€1.10 (VAT incl.)

In stock175 produit(s)

Vacuum and infusion devices. Polyethylene tubing for resin infusion. 10mm x 100m PVS10 Material: PE (polyethylene) Diameter: 10mm 100 ml long Thickness: 1mm +/-0.1 Maximum temperature of use: 100°C Sold by 5ml...

Add to cart

Vacuum hose, ⌀13mm, 60°C

€1.85 (VAT incl.)

In stock70 produit(s)

Vacuum hose reinforced in PVC

Add to cart

Vacuum hose, ⌀19mm, 60°C

€3.31 (VAT incl.)

On order. Delay of about 3 to 4 weeks.0 produit(s)

Vacuum hose reinforced in PVC

Add to cart

Subcategories

Adhesives and sealants

Small supplies

Subcategories

Adhesives and sealants

Small supplies

Polyethylene T-connector for vacuum infusion. Max: 100°C. Diameter: 10mm. PRO-VAC

Polyethylene T-connector for vacuum infusion. Max: 100°C. Diameter: 10mm. PRO-VAC

Polyethylene vacuum infusion inlet block. 16mm diameter x 35mm high. Maximum use: 100°c

Polyethylene vacuum infusion inlet block. 16mm diameter x 35mm high. Maximum use: 100°c

Polyethylene infusion valve diameter 12mm L100mm up to 100°c