Français 
Español 
Português PT 
English GBVacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
Filter By
Filter By
Vacuum infusion molding
Vacuum infusion is a technique used in the nautical industry, wind energy... This process allows the mass production of large parts (airplane, windmill, boat hull...). Vacuum infusion molding consists in putting under vacuum, in a mold closed by a tarpaulin, dry reinforcements which are impregnated with resin which is sucked by the depression created in the mold.
The advantages
Improve the resistance of the composite
Saves weight
Use of just the right amount of resin (better strength to weight ratio)
Production of large and small parts in one-shot
Subcategories
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 200cm, thickness: 75microns
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 200cm, thickness: 75microns
€3.92
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Ideal for resin infusion and prepreg molding applications.
Suitable for all commonly used resin systems.
Not suitable for autoclave use for composite processing.
2mx400ml
Sold by 5 ml minimum
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 100cm, thickness: 75microns
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 100cm, thickness: 75microns
€1.44
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
For polyester and vinylester infusion systems.
Ideal for large, complex parts
Due to its structure, this product is less sensitive to moisture variations
1mx100ml
Sold by 5 ml minimum
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 200cm, thickness: 75microns
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 200cm, thickness: 75microns
€2.27
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
For polyester and vinylester infusion systems.
Ideal for large, complex parts
Due to its structure, this product is less sensitive to moisture variations
2mx400ml
Sold by 5 ml minimum
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 300cm, thickness: 75microns
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 300cm, thickness: 75microns
€4.31
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
For polyester and vinylester infusion systems.
Ideal for large, complex parts
Due to its structure, this product is less sensitive to moisture variations
3mx200ml
Sold by 5 ml minimum
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 800cm, thickness: 75microns
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 800cm, thickness: 75microns
€16.56
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Ideal for resin infusion and prepreg molding applications.
Suitable for all commonly used resin systems.
Not suitable for autoclave use for composite processing.
8mx75ml
Sold by 5 ml minimum
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 600cm, thickness: 75microns
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 600cm, thickness: 75microns
€12.42
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Ideal for resin infusion and prepreg molding applications.
Suitable for all commonly used resin systems.
Not suitable for autoclave use for composite processing.
6mx120ml
Sold by 5 ml minimum
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 300cm, thickness: 75microns
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 300cm, thickness: 75microns
€5.88
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Ideal for resin infusion and prepreg molding applications.
Suitable for all commonly used resin systems.
Not suitable for autoclave use for composite processing.
3mx220ml
Roll: 220m long
Sold by 5 ml minimum
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 1000cm, thickness: 75microns
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 1000cm, thickness: 75microns
€15.73
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
For polyester and vinylester infusion systems.
Ideal for large, complex parts
Due to its structure, this product is less sensitive to moisture variations
10mx75ml
Sold by 5 ml minimum
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 600cm, thickness: 65microns
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 600cm, thickness: 65microns
€10.76
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Ideal for resin infusion and prepreg molding applications.
Suitable for all commonly used resin systems.
Not suitable for autoclave use for composite processing.
PRO-VAC 100-LB-75 IN/PA
6mx150ml
Sold by 5 ml minimum
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 400cm, thickness: 65microns
Blue co-extruded vacuum bagging film for infusion. Maximum use up to 177°C. Width: 400cm, thickness: 65microns
€7.18
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Ideal for resin infusion and prepreg molding applications.
Suitable for all commonly used resin systems.
Not suitable for autoclave use for composite processing.
PRO-VAC 100-LB-75 IN/PA
4mx150ml
Sold by 5 ml minimum
PTFE Silicone Adhesive Tape 50mm 33m, 260°c
PTFE Silicone Adhesive Tape 50mm 33m, 260°c
€225.83
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Non-reinforced teflon adhesive tape at high temperature50mm wide33m long, 260°C
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 800cm, thickness: 75microns
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 800cm, thickness: 75microns
€11.48
(VAT incl.)
In stock80 produit(s)
For polyester and vinylester infusion systems.
Ideal for large, complex parts
Due to its structure, this product is less sensitive to moisture variations
8mx80ml
Sold by 5 ml minimum
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 600cm, thickness: 75microns
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 600cm, thickness: 75microns
€8.62
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
For polyester and vinylester infusion systems.
Ideal for large, complex parts
Due to its structure, this product is less sensitive to moisture variations
6mx125ml
Sold by 5 ml minimum
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 400cm, thickness: 75microns
Green co-extruded vacuum bagging film for infusion. Maximum use up to 120°C. Width: 400cm, thickness: 75microns
€5.74
(VAT incl.)
In stock149 produit(s)
For polyester and vinylester infusion systems.
Ideal for large, complex parts
Due to its structure, this product is less sensitive to moisture variations
4mx200ml
Sold by 5 ml minimum
Peel-off fabric 85g/m² polyester 180°c, in 15 cm width, sold by R100ml
Peel-off fabric 85g/m² polyester 180°c, in 15 cm width, sold by R100ml
€30.06
(VAT incl.)
On order. Delay of about 3 to 4 weeks.0 produit(s)
Tear-off fabric 85g/m² polyester 180°c15 cm widesold by R100ml