Slow epoxy kit 105/206A. For longer curing time. Low viscosity. West System. 1,2kg

WEST SYSTEM slow epoxy kit with a total of 1.2 kg.

Packaging : 1 Kg of resin, 200 gr of hardener

Model : A

Pump : 301-A

Sold without pump

WEST SYSTEM epoxy is THE epoxy reference! WEST SYSTEM epoxies are waterproof, non-shrink, odorless, solvent-free, more flexible, high adhesion on all materials and can be adjusted in setting speed.

Resin 105 is the basis of WEST SYSTEM products from which all components are made. Clear, light yellow, low viscosity liquid epoxy resin. Formulated to impregnate wood fibers, fiberglass and a variety of materials.

Hardener 206 is a low viscosity hardener that becomes a rigid, high strength, moisture resistant solid with excellent bonding and coating properties. It can be used to extend assembly times under ideal working conditions.

Pot life at 25°C: 20 to 30 minutes

Cure to solid at 21°C: 9 to 12 hours

Curing to maximum strength at 21°C : 5 to 7 days

Minimum recommended working temperature: 16°C

Consumption :

- for a 1kg mixture on a porous surface at 25°C: 6.5 - 7.5 m².

- for a 1kg mixture on a non-porous surface at 25°C: 8.5 - 9.5 m²

Attention: For each resin can size, there is a corresponding hardener can size and mini pump size. Make sure that all drums and pumps have the same letter (A, B, C or D). If you have any doubts, please contact our customer service.

Dosing: The mini-pumps allow you to pour the exact proportions of resin and hardener. In order to have correct proportions, it is enough to make one pressure of resin for one pressure of hardener.

Mixing: Mix the resin and hardener for two minutes or longer at low temperatures. Scrape down the sides and bottom of the pot while mixing.

Demonstration video on basic, advanced, repair techniques