Wood supplies
Wood supplies

Burmese teak deck slats

We offer two sawing qualities: decking and standard. Both grades are ideal for cruising boats. The decking quality (decking and semi-decking) will be preferred by the most demanding customers. 100% of stock is planed 4 sides. Possibility to make one or two rabbets on request.

Deck frame

These are 4-sided planed teak planks used to make the central and peripheral parts and deck frames.

Timber or planks

Depending on the profile and the desired use, the sections are often between 26mm and 78mm thick, from 52mm wide and 763mm long. All our edged boards are waxed in end wood, which preserves the quality of the wood during storage. Please note that on this product range there is a variation of +/- 5% on the dimensions.

Plywood & Veneer

Our veneers and plywood are suitable for a wide range of uses: plywood, marquetry, cladding, table tops, restoration and decoration of furniture and walls. Easy to cut, its thin thickness allows it to be glued to any type of support.

Note: to facilitate your navigation, we advise you to click on one of the categories listed below :

Wood supplies

Subcategories

  • Deck Slats

    Our deck slats in Burmese teak wood

    We offer two sawing qualities: decking and standard. Both grades are ideal for cruising boats. The decking quality (decking and semi-decking) will be preferred by the most demanding customers. 100% of our stock is planed 4 sides.

    Our different installation systems

    System of slats laid with screws and fixed Deck spacers that allow you to lock and bend your slats. With the Fix Deck system, installation is very easy with a 4mm, 5mm or 6mm joint.

    Two rabbeted batten system: easy installation of your joints thanks to the regular spacers. Installation with screws and plugs in the centre of the batten.

    Z system batten system: easy installation (like panelling), with screws in the bottom of the rabbet or Fix Deck to be removed. This system ensures a very good seal.

    Option available on quotation

    We can make one or two rabbets on request. We also have the possibility to have super decking quality slats for super yachts.


    Note: to make your search easier, you can use the filter on the left to select the criteria you need.

  • Deck Framing

    Burmese teak deck frames

    Our deck frames are made of Burmese teak and planed 4 sides. They are boards used to make the central and peripheral parts and the deck frames. The hydrometry is about 12%. Variable wood threads.

    For what use?

    Our frames can be used as fern, bridge frames, bridge covers or other.

    Option available on quotation

    We can modify the dimensions and cut out the frames on your request.


    Note: to make your search easier, you can use the filter on the left to select the criteria you need.

  • Timber/Planks

    Burmese teak timber

    Depending on the profile and the desired use, the sections are often between 26mm and 78mm thick, from 52mm wide and 763mm long. All our sawn timber is rough sawn and waxed at the end, which preserves the quality of the wood during storage.  Please note that there may be a variation of +/-5% in dimensions.

    For what purpose?

    Thanks to its tight and fine grain, teak is an easy wood to work with. It is ideal for all types of joinery work. Our planks cannot be used as they are, as they are rough. It will therefore have to be planed and then planed.

    Option available on quotation

    We can modify the dimensions and cut the edges on your request.


    Note: to make your search easier, you can use the filter on the left to select the criteria you need.

  • Plywood

    Okoume marine plywood

    Our Okoumé marine plywoods are ideal for making deck substructures, they are not intended to be used as a decorative element, they have appearance defects (glue marks).

    FLEXITeakcell plywood

    Ideal for cladding, making cladding panels. It consists of a Burmese teak face and an Asian beech face.

    Teak marine plywood

    Composed of a marine Okoumé side and a Burmese teak side.

    Boat deck plywood

    Composed of an Okoumé side and a teak jointed deck style boat deck


    A plywood panel is a panel obtained by gluing several sheets together. These different sheets make up what is known as a ply (always in odd numbers).

    We can cut plates to your dimensions on request.

    Note: to make your search easier, you can use the filter on the left to select the criteria you need.

  • Veneer

    Burmese teak veneer

    Our veneers are suitable for a wide range of uses: marquetry, cladding, table tops, restoration and decoration of furniture and walls. Easy to cut, its thin thickness allows it to be glued on any type of support.

    Attention, this product is very easy to use and must be handled with care. The edges are trimmed.


    Note: to make your search easier, you can use the filter on your left to select the criteria you need.

  • Sticks

    Profiled strips in Burmese teak wood

    We offer you different rod sections and different profiles: U rod, quarter round, oval, fargue rod, joint cover, nose for partition, corner rod...

    Whether in your boat or in your house, the mouldings will bring a warm touch and a certain charm.

    We have the possibility of making profiles to your measurements on estimate.

  • Composite panels and...

    Lightweight sandwich panel solution

    DuFlex lightweight composite panel solution is a composite panel system that minimizes weight and maximizes mechanical properties. The panels are made of rigid balsa wood butt or structural and non-structural foam, and laminated with a high performance epoxy resin reinforced with a multi-axial film of fiberglass or carbon fiber.


    Technical characteristics of the panels

    By using epoxy resin instead of polyester resin, a reduction in the thickness of the laminate is achieved while improving moisture and wear tolerance. Epoxy resin has better resistance to moisture and wear.


    Connection between panels

    DuFlex panels can be supplied with both long edges pre-machined for easy assembly. The Z-joint is structurally efficient and results in a smooth and even surface profile. The Z-joint should be bonded with a high-density epoxy mixture.

per page
Showing 1 - 20 of 2048 items